Shuoboda Instruments (Hunan) Co., Ltd.
Add to Cart
Product introduction
DA-3000A Semi-automatic TLD Reader is a highly reliable and cost-effective thermoluminescent reader that can effectively measure the radiation dose absorbed by the thermoluminescent material contained in the dose box.
The reader is integrated with an automatic sample introduction/ejection system, which can automatically read up to 120 dosage elements in one load, supporting multi-batch continuous measurement.
The system software integrates a result database, so operators can easily manage measurement data in various formats and generate measurement reports in specific formats.
Features:
Ø Automatic sample injection, ejection, measurement and data processing, one load can automatically and continuously measure 120 dosage chips and can read 100 chips per hour
Ø Accurate measurement, using wide range, high resolution, high stability, intelligent amplifier, and extended range
Ø Safe, reliable, and stable in operation. The core components, CU, and interface chips are all domestically produced devices, with strong substitutability and good supply guarantee capabilities.
Ø It is simple to operate and has a good human-machine interface for convenient and quick operation. It has built-in diagnostic function, running process display and voice prompt function.
Ø Rich interfaces, with standard S232/USB/RJ45 network interface
Technical parameters
| physical parameters | |
| size and weight | 345*240*270mm; weight about 25kg |
| shell material | Sheet metal shell, spray-coated or anodized |
| Environment | -20℃~60℃, humility 10%~60% |
| Power supply | 220VAC/50Hz |
| operating parameters | |
| Operation mode | Single sample testing |
| Detection method | Automatic continuous reading |
| interactive mode | Photomultiplier tube detection, analog signal amplification processing |
| maintenance mode | Equipped with touch screen human-machine interface and application software for simultaneous dual-work operation |
| Adapted dose chips | With self-diagnosis function; modular design facilitates quick replacement on site |
| measuring ray | γ, β, X, neutron rays |
| Heating unit parameters | |
| Heating method | Electrode heating, linear temperature rise, maximum temperature 500℃ |
| Get temperature | Room temperature ~500℃ can be set arbitrarily |
| pre-heat temperature | Room temperature ~500℃ can be set arbitrarily |
| Heating rate | 0℃/s~50℃/s can be set arbitrarily |
| Temperature control accuracy | ±1% |
| Measurement unit parameters | |
| measurement method | Photomultiplier tube (PMT), analog signal amplification 109 levels |
| High voltage supply | High voltage 0～1200V adjustable, high voltage stability: ±0.005% |
| Detection unit cooling | Semiconductor plus controlled refrigeration, the refrigeration temperature can be set |
| Measuring range | 0.1μSv～12Sv; up to 300Sv (sensitized magnesium titanium sheet) |
| Measurement resolution | Under laboratory conditions, it can reach 0.1μSv after sufficient preheating. |
| Measurement stability | 10 consecutive measurements after sufficient preheating, RSD≤1% |
| dark current | After preheating, multiple continuous readings RSD≤1% |
| Reference light | After preheating, multiple continuous readings RSD≤1% |
